Welcome to our resource for MG Car Information.
MG Midget and Sprite Technical - custom oil pan
| after watching a recent ebay auction for a custom oil pan go ridiculously high I thought I would build some and see if anyone wants one. I am not looking for a ton of money for a custom oil pan but I think it can offset the price of my project by modifying some of the spare oil pans I have in the shop. http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=170190956768&ssPageName=STRK:MEDW:IT&ih=007 That is the item that was on ebay, speedwell used to make one with a windage tray as well. If anyone wants a custom pan just send me an email or add some input into the design of these pans. I am building a costom pan for my turbo with an oil return so I can use the oil mounting for the fuel pump as a crankcase vent. |
| Stefan |
| Hey stefan, send me an email Propaper(at)mchsi(dot)com thanks prop I was tracking that as well, I can not belive it went for that.... prop |
| Prop |
| Now, if someone could cast an alloy one with some crossbracing, finned base, proper seals at the front and back, breathers and a trap at the back to catch rear seal drips....... I tried a UK company (Vale Castings) but they said it would be too difficult to cast unless using a vacuum method. How about making the top, sides and base in 3 pieces and welding it??? Imagine a sump that didn't warp and also added to the rigiditty of the crankcase! |
| rob multi-sheds thomas |
| I think it was so expensive because it's so light. Look again in two of the images it looks like its levitating. |
| Same old Gary |
| Why don't you contact Speedwell to see if you can make some for them? |
| Daniel Thirteen-Twelve |
This thread was discussed on 13/02/2008
MG Midget and Sprite Technical index
This thread is from the archive. The Live MG Midget and Sprite Technical BBS is active now.